General

Why is no data being shown on the Solo III display?
Check that the Solo III is paired to the hub and that the hub is also paired to the meter. The link icon should be GREEN. The Solo III will show the sig...
Can I extend the range on my HUB?
You can use a power line extender to allow the HUB to be moved closer to the meter if your router is too far away from the meter. What is power line ada...
During the HUB upgrade what do the LED's indicate?
Previously: LEDs flashed green alternately only during the period of the initial HUB firmware upgrade. All other upgrades (eg. display firmware) were done...
How do I reset the hub?
To reset the hub, insert a pointed object in to the reset button on the base of the hub for five seconds while the hub is powered on. The hub will then ...
How do I reset the Solo III?
Remove power to the display and then press and hold the three buttons while powering the display back on. Press the right (n) for DATA RESET and then th...
Why can't I see any historical data on my Solo III Display?
Your Solo III Display relies on the Solo III Hub to provide data as well as time information. If your Hub is not connected to our cloud service, then you mi...
My energynote account does not match my Solo III display
If you install your Solo III display and then register on energynote at a later date then energynote will fail to match your display reading until after 3...
How do i change the currency on my display to Euro?
1. Press and hold the middle button on the display until the general settings screen appears 2. You will then have the option to select INFO, SETTINGS o...
How do I associate energynote without a display/secure code?
Providing the cloud light is showing amber on your Hub press and hold cloud button for 3-4 seconds until the light flashes, select the time zone on your e...
CE Documentation
Below is the documentation for European Conformity (Solo 3 Meter) emlite CE Declaration of Conformity [PDF] emlite EC-type Certificate [PDF] GEO CE...